McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 196

perf
2
Command Example
E/OS Command Line Interface User Manual
2-152
with the threshold alert name created using the
perf.thresholdAlerts.counter.addAlert
NOTE: An alert cannot be modified unless it is in the disabled state. Verify
that the alert is disabled before executing this command.
This command has the following parameters:
Parameters
name
counterNumber
Root> perf thresholdAlerts counter setCounter checklinks 1
command.
The name of a counter threshold alert as
defined by the command
perf.thresholdAlerts.counter.addAlert, described
in 2-149.
Specifies the counter number. Valid values are
shown in Table 2-3, Alert Counters, page 2-147.