Show.epframelog.disabletrigger; Show.epframelog.filterclassfframes - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

show
2
Command Example

show.epFrameLog.disableTrigger

Command Example

show.epFrameLog.filterClassFFrames

E/OS Command Line Interface User Manual
2-170
End Bit Pattern
Start Condition
Met
End Condition Met False if the end condition was not met.
Root> show EPFrameLog config
Filter Class F Frames:
Filter Port:
Start Offset:
Start Bit Pattern:
End Offset:
End Bit Pattern:
Trigger State:
Num of Entries:
Start Condition Met:
End Condition Met:
Syntax
disableTrigger
This command clears the embedded port frame log trigger, which
Purpose
was configured with the command show.epFrameLog.setTrigger.
This command has no parameters.
Parameters
Root> show epFrameLog disableTrigger
Syntax
filterClassFFrames [enable]
This command will turn on or off the ability to filter out Class-F
Purpose
frames, or show its current state. When the filtering is enabled,
everything but Class-F frames will be logged. This setting will not be
stored in NV RAM and will not persist after IML.
The bit pattern that triggers the logging to
end.
True if the start condition was met.
Disabled
15
0
FFXXXXX3452
0
FBXXXXX3321
Active
6
True
False