Config.features.opentrunking; Config.features.show - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Parameters
Command Example

config.features.openTrunking

Syntax
Purpose
Parameters
Command Example

config.features.show

Syntax
Purpose
Parameters
This command has one parameter:
osmsState Specifies whether the Open Systems
Management Server is enabled. Valid values are
enable and disable. Boolean 1 and 0 may be
substituted as values.
Root> config features openSysMS 1
NOTE: The command
config.openSysMS.setState
functionality that is identical to this command.
openTrunking openTrunkingState
This command enables or disables OpenTrunking feature. The
OpenTrunking feature key must be installed in order to enable open
trunking.
This command has one parameter:
openTrunkingState This parameter can be set to enable or disable
the OpenTrunking feature. Boolean 1 and 0
may be substituted as values.
Root> config features openTrunking 1
NOTE: The command
perf.openTrunking.setState
functionality that is identical to this command.
show
This command shows the product feature information configured for
this director or switch.
This command has no parameters.
on page 2-25 has
on page 2-136 has
CLI Commands
config
2
2-9