Config.security.ssl.setapistate; Config.security.ssl.show - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Parameters
Command Example

config.security.ssl.setAPIState

Syntax
Purpose
Parameters
Command Example

config.security.ssl.show

Syntax
Purpose
Parameters
Command Example
This command has one parameter:
sslEnabledState
Root> config security ssl setWebState 0
setAPIState sslEnabledState
This command sets the enabled state for the SSL API interface. The
default API access is non-secure. If SSL is enabled, there is no visual
indication provided to the end user.
This command has one parameter:
sslEnabledState
Root> config security ssl setAPIState 1
show
This command displays the SSL certificate, its MD5 and SHA-1
fingerprints, and the SSL enabled states for the web and API
interfaces.
This command has no parameters.
Root> config security ssl show
This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.
This parameter can be set to enable or disable.
Boolean 1 and 0 values may also be
substituted.
config
CLI Commands
2-73
2