Command Example
config.zoning.replaceZoneSet
Syntax
Purpose
Parameters
Command Example
config.zoning.setDefZoneState
Syntax
Purpose
Parameters
Command Examples
config.zoning.showActive
Syntax
Purpose
Parameters
Command Example
Root> config zoning renameZoneSet TheUltimateZoneSet
replaceZoneSet
This command replaces the work area with the active zone set that is
currently loaded on the fabric.
This command has no parameters.
Root> config zoning replaceZoneSet
setDefZoneState defaultZoneState
This command enables or disables the default zone and takes effect
immediately fabric wide.
NOTE: This command takes effect immediately in the fabric.
This command has one parameter:
defaultZoneState
Specifies whether the default zone is enabled.
Valid values are true and false. Boolean 1 and 0
may be substituted as values.
Root> config zoning setDefZoneState false
Root> config zoning setDefZoneState 0
showActive
This command shows the zoning configuration saved on the fabric.
This command has no parameters.
Root> config zoning showActive
config
CLI Commands
2-121
2