Maint.system.clearsyserror; Maint.system.ipl; Maint.system.resetconfig - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

maint
2

maint.system.clearSysError

Command Example

maint.system.ipl

Command Example

maint.system.resetConfig

E/OS Command Line Interface User Manual
2-126
Syntax
clearSysError
This command clears the system error light.
Purpose
This command has no parameters.
Parameters
Root> maint system clearSysError
Syntax
ipl
This command IPLs the switch.
Purpose
ATTENTION! Connection to the CLI is lost when this command runs.
This command has no parameters.
Parameters
Root> maint system ipl
Syntax
resetConfig
This command resets all NV-RAM configuration parameters to their
Purpose
default values, including feature keys and IP addresses.
NOTE: This command IPLs the switch. Connection from the CLI to the
switch is lost when this command runs.
ATTENTION! This command resets all configuration data and non-volatile
settings, including network information, to their default values (factory
settings). Management access may be lost until the network information is
restored.
The default values are set in the firmware of the director or switch.
For information about the default values, refer to the service manual
of your director or switch.
This command has no parameters.
Parameters