config
2
Command Example
config.system.name
Command Example
config.system.show
Command Example
E/OS Command Line Interface User Manual
2-112
This command has one parameter:
Parameters
systemLocation
Root> config system location Everywhere
Syntax
name systemName
This command sets the system name attribute.
Purpose
This command has one required parameter:
Parameters
systemName
Root> config system name JoeSwitch
Syntax
show
This command shows the system configuration.
Purpose
This command has no parameters.
Parameters
Root> config system show
The system configuration is displayed as a table that includes the
Output
following properties:
Name
Description
Specifies the new system location for the
director or switch. The location can contain
0–255 characters.
Specifies the new system name for the switch or
switch. The name can contain 0–24 characters.
The system name.
The system description.