Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 303

1 In the Catalog drop-down list, select the catalog that you want to configure.
2 In the Local Name field, specify a name for the selected catalog.
The local name for the catalog should not be same as that reserved for the <catalogname>-
patches folder. If the name is not specified, then the name of the catalog selected in the Catalog
field is used.
3 In the Folder field, specify the eDirectory folder in which the bundles and catalogs are created
and updated.
If no folder is specified, then the catalogs and bundles are created and updated in the
folder.
zlmmirror
4 In the Targets list, click Browse to browse for and select the targets you want to mirror. By
default, all the targets in the selected catalog are mirrored.
To remove a target from the list, select the target, then click Remove.
5 (Conditional) The Category field is displayed only if you have selected the NU type servers of
SLES 10, SLED 10, and OES 2 in the xzlmmirror-Server Settings window. Select the
categories you want to mirror. The available options are Security, Recommended, and Optional.
By default, all the categories are mirrored.
6 In the Local Bundle Name field, specify a name for the bundle.
If you specify the local bundle name, you must not specify the <Bundle> tag. This is applicable
only for the RCE, NU, and RHN services in which a catalog has only one bundle on the remote
server. The local bundle name is not applicable when you mirror OES from the RCE service
with more than one bundle per catalog.
/
Mirroring Software 303