Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 579

--arch=[arch] - Specifies a new arch value.
--pkgmgr=[package manager] - Specifies a new Package Manager value.
--enable - Enables a disabled OS Target.
--disable - Disables an enabled OS Target.
--role=[primary role] - Specifies the primary role of this target.
--product=[product name] - Specifies a new product name.
--vendor=[vendor] - Specifies a new vendor.
--detect=[detect string] - Specifies the OS detection string.
--version=[version] - Specifies a new version.
Workstation Commands
These commands are used to manage workstations. Workstation commands begin with the word
in the long form, or with the letter
workstation
workstation-ack (wa) [options] [workstation name] [log ID] [...]
Acknowledges a message associated with a workstation.
workstation-add-bundle (wab) [options] [workstations] [bundle] [...]
Assigns one or more bundles to a device. Accepts the following option flags:
--dry-run - Simulates the transaction and does not make any changes on the managed device.
This option is not applicable for File bundles.
-a, --allow-removal - Allows packages to be removed if there are conflicts. This option is not
applicable for File bundles.
--push-now - Immediately pushes the bundle to the managed device.
--prepare-time=[HH:MM] - Specifies a time of day when the action must be performed. The
time must be specified in the HH:MM format, with hours in 24-hour format.
--prepare-date=[YYYY-MM-DD] - Specifies a date when the action must be performed. The
date must be specified in the YYYY-MM-DD format.
--time=[HH:MM] - Specifies a time of day when the action must be performed. The time must
be specified in the HH:MM format, with hours in 24-hour format.
--date=[YYYY-MM-DD] - Specifies a date when the action must be performed. The date must
be specified in the YYYY-MM-DD format.
---relative=[DD:HH:MM] - Specifies that the action must be performed at a time relative to
now. The time must be in the DD:HH:MM format. A repeat frequency can be specified.
--weekly=[MWF] - Specifies the days of the week when the action must be performed. If
specified, the action is repeated on the specified days every week. For example, if you
specify MWF, the action is executed every Monday, Wednesday, and Friday. The values for
the days of a week are:
Monday = M
Tuesday = TU
Wednesday = W
Thursday = TH
Friday = F
Saturday = SA
Sunday = SU
in the short form.
w
Command Line Utilities 579