Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 400

4 Click Preboot Services to display the Preboot Services configuration page:
If you have not previously configured for this folder or device, the following is displayed:
Current: (System) (Override settings)
and the
on whether you are at the folder or device level.
5 To configure the settings for the folder or device, click Override.
The following is displayed:
Current: /Devices/Servers
Revert to settings from: (System)
and the
on whether you are at the folder or device level.
6 Select which option to use (PXE must be enabled on the device for the menu to be displayed):
Always Show Preboot Menu
Never Show Preboot Menu
Show Preboot Menu if CTRL+ALT is Pressed
IMPORTANT: Do not select Always Show Preboot Menu if you have AutoYaST or kickstart
bundles assigned to any devices, because the Preboot Services Menu interrupts the PXE boot
process, keeping the AutoYaST or kickstart bundles from being deployed on the device. The
Preboot Services Menu only has options for doing imaging work, not for installing operating
systems.
Therefore, select either Never Show Preboot Menu or Show Preboot Menu if CTRL+ALT is
Pressed for your Preboot Services Menu option, which allows PXE-enabled Linux devices to
automatically implement the AutoYaST or kickstart bundles.
7 Click Apply or OK.
OK: Enables the change and exits the page.
400 Novell ZENworks 7.3 Linux Management Administration Guide
Preboot Menu Options section is disabled for editing. The above text varies depending
Preboot Menu Options section is enabled for editing. The above text varies depending