Configuring Preboot Services Defaults - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

2 To change the appearance of the menu, edit the first seven sections (title and colors).
To change colors, the mnemonics you enter must be selected from the following:
BLACK
BLUE
GREEN
CYAN
3 To change the menu options, edit the last four sections, beginning with "MenuOptionCount."
The menu options, their code, and their hint descriptions are correlated by the number (see "#"
where used below).
MenuOptionCount: This number must match the total number of options defined in the next
three sections. The limit is 9 menu options.
option#: Displayed in the menu as the option's text.
CFG#: The configuration file that is used upon selecting the menu option.
Hint#: Displayed in the bottom of the screen to explain the highlighted menu option's
function. It changes as you highlight a menu option.
IMPORTANT: If you add or subtract a menu option, make sure that you do the same thing to
each of the last three sections. The numbering should be consecutive (such as 1 through 5). Be
sure to keep the corresponding items matched in each of the last three sections.
4 When finished, save the

29.4 Configuring Preboot Services Defaults

You can configure Preboot Services default settings for a ZENworks Management Zone. These are
settings that apply globally to all devices in the management zone.
Some of these settings enable you to automatically register devices with the ZENworks Linux
Management server, and some can be overridden by configurations done for devices or folders
containing devices. For more information, see
Defaults," on page 399.
The following default settings can be configured in the ZENworks Control Center:
Section 29.4.1, "Configuring Preboot Services Menu Options," on page 380
Section 29.4.2, "Configuring Image Storage Security," on page 381
Section 29.4.3, "Configuring Non-registered Device Settings," on page 383
Section 29.4.4, "Configuring Preboot Work Assignments," on page 386
Section 29.4.5, "Configuring the Server Referral List," on page 393
Section 29.4.6, "Configuring Intel Active Management Technology (AMT)," on page 395
RED GRAY
MAGENTA YELLOW
BROWN BRIGHT_WHITE
WHITE LT_BLUE
file.
pxemenu.txt
Section 29.5, "Overriding Preboot Services
LT_GREEN
LT_CYAN
LT_RED
LT_MAGENTA
Setting Up Preboot Services 379