Renaming Or Copying Registration Rules - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

Criteria
OS
4b (Optional) Click Add Filter again to add an additional row of criteria and repeat
and
Be aware that the rows in the filter are separated by And. If you specify multiple rows in
the filter, the criteria in all rows must be met for the rule to apply.
5 (Optional) In the Values Applied to Imported Machines section, make the desired changes:
Name given to imported machines: Select one or more machine variables to provide a
naming scheme for registering devices.
Avoid spaces in your naming scheme; these spaces must be escaped when using the command
line utilities. For example, use ${HostName}-${OS} rather than ${HostName} ${OS}.
Folder where imported machines should be placed: Specify the folder where devices should
be placed.
As a general rule, devices with similar configuration settings (refresh intervals, logging
settings, remote management settings, and so forth) should be grouped in the same folder so
that you can specify the configuration settings on the folder and have the devices in the folder
inherit them. You should not use the same folder for devices that require different configuration
settings; doing so would prohibit you from using the folder to define the settings and force you
to define them on each individual device.
Group membership: Click Add to add a group. You can only add groups that are valid for the
type of device folder you specified on the previous page of the wizard. For example, if you
specified the
remove a group, select the box next to the group's name, then click Remove.
6 Click Apply.

12.2.3 Renaming or Copying Registration Rules

1 In the ZENworks Control Center, click the Configuration tab.
2 In the Default Registration Rules section, click Advanced.
3 Select a registration rule by selecting the box next to its name, click Edit, then click an option:
Rename: Click Rename, type a new name for the registration rule, then click OK.
118 Novell ZENworks 7.3 Linux Management Administration Guide
Possible Value
The format for this value is not free form; the values for the supported
OS platforms are:
suse-93-i586
suse-93-x86_64
sles-9-i586
sles-9-x86_64
rhel-3as-i386
rhel-3es-i386
rhel-3ws-i386
rhel-4as-i386
rhel-4es-i386
rhel-4ws-i38
Step 4b, as many times as necessary.
/Devices/Workstations
folder, you can only choose workstation groups. To
Step 4a