Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 311

Configuration Element
<Folder></Folder>
Your edited zlmmirror configuration file should look similar to the following example. If your
configuration file is set up to mirror a CD, the
section contains
<RemoteServer>
<Base>http://ftp.dell.com</Base>
<ZLMMirrorConf>
<Session>
<RemoteServer>
<Base>http://ftp.dell.com</Base>
<Proxy></Proxy>
<Type>dell</Type>
<User></User>
<Password></Password>
</RemoteServer>
<LocalServer>
<Type>zlm</Type>
<Base></Base>
<User>Administrator</User>
<Password>password</Password>
</LocalServer>
<Catalog>
</Catalog>
</Session>
</ZLMMirrorConf>
7 Save the file.
This downloads all the bundles available in the specified catalog. If you want to download a
specific bundle, specify the bundle name as shown below:
<Bundle>Bundle_Name</Bundle>
Setting
Name of the folder where the Dell Update Packages are created and
updated:
<Folder>/folder_name</Folder>
Specifies the eDirectory folder (for example,
and catalogs are created and updated. If not specified, the catalogs
and bundles are created and updated in the
<Base></Base>
<Base>file:///path/to/cd</Base>
.
<Name>catalog_name</Name>
<LocalName></LocalName>
<Folder>/folder_name</Folder>
<Target></Target>
<ExcludeTarget></ExcludeTarget>
<Bundle></Bundle>
<ExcludeBundle></ExcludeBundle>
/Dell ) where bundles
/zlmmirror folder.
configuration element in the
instead of
Mirroring Software 311