Table of Contents
Advertisement
7 Specify the password to use to authenticate to the SMTP server.
IMPORTANT: For security considerations, you should create a separate e-mail account and
password to send ZENworks messages.
8 In the Message Settings section, specify the sender's e-mail address in the From field. The error
messages are sent from this e-mail address.
9 In the To field, specify the e-mail address of the recipients.
You can specify more than one e-mail address by separating the addresses with commas.
10 Specify a subject for the e-mail.
The following table describes how you can customize the subject field:
Format Specifiers
%s
%c
%d
%t
%a
Format specifiers are a special set of characters that are replaced with their associated values.
For example, if you want the subject line to be displayed as "ERROR occurred on device
TestDevice at 4/7/05 5:31:01 PM," then in the subject line you should specify "%s occurred on
device %a at %t."
11 Click OK or Apply.
40.1.4 Configuring SNMP Settings
These settings allow you to send messages as SNMP traps. The location of the MIB file is
novell/zenworks/share/loggermodule/messageloger.mib.
NOTE: The MIB file should not be modified or deleted, or sending of traps does not work.
1 In the ZENworks Control Center, click Configuration.
2 In Management Zone Settings, click Centralized Message Logging.
3 Under SNMP Traps, select the Log to SNMP Trap if Severity Is check box to enable all the
fields.
4 In the Log to SNMP Trap if Severity Is field, select a value from the drop-down list.
Select Error to forward as traps the messages that have Error, Information, Warning, and
Debug severity.
Select Warning and Above to forward as traps the messages with a severity of Warning
and Error.
Select Information and Above to forward as traps the messages that have a severity of
Information, Warning, and Error.
Value
Severity of the message
Component name
Device ID
Time when the message is generated
Alias name of the device on which the message is generated.
/opt/
Configuring Message Logger Settings 527
Advertisement
Table of Contents
