Starting Remote Management Operations Using The Native Vncviewer - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

5 Select the IP address of the device.
6 Select the Remote Management operation to be performed on the device.
The drop-down list of operations is based on the effective Remote Management Settings for the
managed device. The available options are Remote control, Remote view, and Remote login.
The following table lists and explains all the operations you can select from the drop-down list:
Option
Remote Control
Remote View
Remote Login
7 Specify the port number configure for the selected operation.
The auto-populated port numbers are those which are configured in the effective Remote
Management Settings for the selected device.
8 Click OK.
9 Read the Java Security message and click Yes to accept the Certificate of the Signed Applet. To
avoid the message to be displayed again, select Always.
10 If the Ask for permission from user on the managed device setting is enabled, click Yes on the
permission change dialog-box on the managed device.
11 Specify the password at the management console, then click OK.
36.4 Starting Remote Management Operations
Using the Native VNCViewer
The following sections contain additional information:
Section 36.4.1, "Starting Remote Management Operations Using the Windows VNC Viewer,"
on page 504
Section 36.4.2, "Starting Remote Management Operations Using the Linux VNC Viewer," on
page 504
Description
Allows you to take control of the managed device.
Allows you to view the managed device.
Allows you to remotely login to a new desktop session on the managed
device. This desktop cannot be viewed by the users on the managed
device.
Setting Up Remote Management 503