Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 412

8 Fill in the fields:
Base image file: This is an image file existing on an imaging server. You must provide the full
path and filename here. The image filename must end in (case-sensitive). For information
.zmg
on creating a base image, see "Taking a Base Image of a Device" on page 408.
Add-on image files: These are existing image files that you can add onto the device after it is
re-imaged with the base image file. You must provide the full paths and filenames here. The
image filename must end in (case-sensitive). For information on creating an add-on
.zmg
image, see "Creating an Add-On Image" on page 419.
File set: File sets are assigned to the current ZENworks Image bundle using this File set field.
File sets are defined on the imaging server from the base image using the Image Explorer
utility, which can be run on a Windows device from a Linux server running Samba. The Image
Explorer utility is located at on the
/opt/novel/zenworks/zdm/winutils/ImgExp.exe
Linux server.
When you define a file set using Image Explorer, you specify files and directories to be
excluded from the image. Thus, a file set is a subset of the original image that excludes the files
you select in Image Explorer. A separate image file is not created for the file set; instead, a file
set contains internal attributes representing the excluded information. Therefore, even though a
file set does not exist as a separate, physical image file, it is accessed as though it is, placing the
image on the receiving device, minus the excluded files.
For example, is the image file on your imaging server. You use Image
device1image.zmg
Explorer to determine which data to exclude and assign this to a file set number, such as 2.
When a device assigned to this ZENworks Image bundle boots, it is imaged with the smaller
version (file set 2) of .
device1image.zmg
412 Novell ZENworks 7.3 Linux Management Administration Guide