Overriding Preboot Services Defaults - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

Move up/Move down: Arranges the order in which the AMT names are listed. You can move
only one at a time.
Remove: To remove a name from the list, select the name, then click Remove.
5 Click either Apply or OK to save the changes

29.5 Overriding Preboot Services Defaults

You can determine which Preboot Services Menu displays a configuration to use and whether the
menu should be displayed on a device when it boots. By default, the ZENworks Management Zone
configuration applies to all folders and devices. You can override this at the folder or device level.
For more information on the Preboot Services Menu options, see
Menu," on page 333.
The Preboot Services Menu can be customized by editing the
information, see Section 29.3.4, "Editing the Preboot Services Menu," on page
To override the default configuration at the folder or device level:
1 In the ZENworks Control Center, click the Devices tab to display the Devices page:
2 Select one of the following on this page:
The Details option next to the Servers or Workstations folder
The Servers folder, then a server contained in the folder
The Workstations folder, then a workstation contained in the folder
3 On the page that is displayed, click the Settings tab to display the Settings page options:
Section 28.3.2, "Preboot Services
file. For more
pxemenu.txt
376.
Setting Up Preboot Services 399