Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 664

default 1
immediately after "label" on a line, such as
parameter is listed.
10c On the ZENworks server, open the
dtk_maint.cfg
what you obtained in step
11 To ensure that the Dell DTK has been properly updated on the ZENworks server, reboot the
device into PXE and select the Dell DTK (Maintenance Mode) option.
12 To verify that the build number has increased from the number you noted in
bash (#) prompt is displayed, view the content of the
If the build number has not incremented, either it really isn't an update, or the copy operations
failed.
664 Novell ZENworks 7.3 Linux Management Administration Guide
on a line, indicating the default section's name is "1," which is displayed
/srv/tftp/dell-dtk.cfg
files and modify all
Step 10b.
under which the
label 1
parameter values to be the same as
ramdisk_size
file:
/BUILD
ramdisk_size
and
/srv/tftp/dell-
Step 5, when the