Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 629

Parameter Description
PolicyLogFile = /var/ The file where all log file entries are placed.
opt/novell/log/
By default, this parameter is commented out.
zenworks/preboot/
novell-
zenprebootpolicy.log
PolicyLogFileSize = 15 The size of the log file is controlled by the value of PolicyLogFileSize, where 15
is the default (in MB).
When the log file exceeds the PolicyLogFileSize value, it is deleted and
restarted.
PrebootServer = This field contains the address of the imaging server that should be used to
10.0.0.5 resolve policies.
By default, this parameter is commented out.
EnableAMTSupport = This feature is not currently supported in Novell ZENworks Linux Management.
Yes
This field enables or disables support for Intel's AMT technology.
By default, this support is disabled by commenting out the parameter.
Parameters that are not commented out, but contain no values, are given a default value.
Understanding Script Arguments
The following arguments are available for each of the Preboot Services daemons described above:
Script Arguments
Table D-13
Argument Function
start Starts the daemon.
Because novell-proxydhcp is optional, use this argument to start this daemon.
However, this daemon does not automatically start when the server reboots.
(See
start setjustimagedflag For novell-zislnx only, it sets the Just Imaged flag so that a device can be
imaged using its existing Image Safe Data.
stop Stops the daemon.
restart Stops and restarts the daemon if it is already running.
force-reload Causes the daemon's configuration file to be reloaded.
status Displays the current status of the daemon.
For example, if you enter
information similar to the following is returned:
Novell ZENworks Imaging Service running
install below.)
/etc/inid.d/novell-pbserv status
,
Imaging Utilities and Components 629