Table of Contents
Advertisement
Example
img session mcast01 m
img session mcast01 master
clients=5
img session mcast01 master
clients=5 time=20
E.6 Partition Mode (img part)
Use the Partition mode to activate (make bootable), add, or delete a partition on the device.
You can activate, add, or delete a partition using either ZENworks Imaging Engine menu or the bash
prompt.
The Partition mode can be used in two ways:
Section E.6.1, "Using the ZENworks Imaging Engine Menu," on page 641
Section E.6.2, "Using the Bash Prompt," on page 642
E.6.1 Using the ZENworks Imaging Engine Menu
1 Enter
to display the ZENworks Imaging Engine menu, then click Partitioning.
img
2 Click Modify partitions, then click an option:
Active: Select a partition that you want to activate (make bootable), then click Active.
Add: Opens the Create New Partition window. Click a partition type, partition size, and cluster
size, then click OK.
Delete: Select a partition, then click Delete.
For more information, see the table in
Explanation
Starts a multicast session named
this device as the master. Each successive device that
issues
img session mcast01
begins joins the session as a participant. Imaging doesn't
start until the master user presses
Starts a multicast session named
successive device that issues
before the imaging begins joins the session. Imaging
doesn't start until one of the users presses
himself as master, or until the imaging session is started
from the imaging server by selecting Manually Start
Multicast, providing the required information, then selecting
Yes. Five other devices must also register as participants
before the session begins.
Starts a multicast session named
successive device that issues
before the imaging begins joins the session. Imaging
doesn't start until one of the users presses
himself as master, or until the imaging session is started
from the imaging server by selecting Manually Start
Multicast, providing the required information, then selecting
Yes. Either five other devices must register as participants
or more than 20 minutes must elapse between any
consecutive participant registrations, whichever occurs
first, and then the session begins.
Section E.6.2, "Using the Bash Prompt," on page
ZENworks Imaging Engine Commands 641
and designates
mcast01
before the imaging
.
g
mcast01
. Each
img session mcast01
m
to designate
. Each
mcast01
img session mcast01
to designate
m
642.
Advertisement
Table of Contents
