Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 236

14 (Optional) Select the Bundle lock special flag to lock bundles on the managed devices from the
server.
You can also use the command line utility to lock the bundles. For more information, see
Section 21.2, "Locking and Unlocking a Bundle on a Managed Device," on page 266
The Remove conflicting packages and Attempt a dry run special flags are not applicable for File
Bundles.
15 Specify the desired Scheduling options:
Deploy and install at a scheduled time: Use this option to schedule the deployment and
installation of the bundles contained in this bundle group. Click the Schedule icon to
choose the schedule type.
The following schedules are available. Click the link in the left column in the table below
for more information about each schedule type and its options.
Schedule Type
Date Specific
Relative to Refresh
Deploy and install at separate scheduled times: Use this option to specify an optional
deployment schedule separate from the installation schedule. If you select this option, you
can set up a deployment schedule and an installation schedule. If you do not select this
option, the packages will be deployed and installed on assigned devices according to the
schedule. Click the Schedule icon to choose the schedule type.
The following schedules are available. Click the link in the left column in the table below
for more information about each schedule type and its options.
236 Novell ZENworks 7.3 Linux Management Administration Guide
Description
Select one or more dates on which to install the bundle on
assigned devices and set other restrictions that might apply.
Schedule when the bundle is installed, either immediately after
the device refreshes or a specified amount of time after the
device refreshes. You can also specify whether the bundle's
installation is repeated and specify a time period when you do
not want the bundle installed to help minimize network traffic
during that time.