Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 549

,
-r --no-remote
Do not load any optional modules.
--no-services
Don't load the saved services.
Help Options
,
--help -?
Display the help information and exit.
Files
zmd.conf
Configuration file. Options such as proxy and cache settings can be adjusted through this file
directly or with the
on SLES 9, OES 1, NLD, RHEL 3/4/5; and in
zmd/
OES 2.
novell-zmd
Initialization script. You should use this script to start and stop zmd, rather than running it
directly. The file is located in
and OES.
zmd-messages.log
Log file. The file is located in
and RHEL 3/4/5; and in
zmd
Cached information from servers. The directory is located in
on SLES 9, OES 1, NLD, and RHEL 3/4/5; and in
cache/
10, and OES 2.
initial-configuration
URL for the supported services that zmd registers at initial startup. You can provide all the
options that you would have otherwise used from rug for registration. The file is located in
etc/opt/novell/zenworks/zmd/
on SLES 10, SLED 10, and OES 2.
zmd/
Examples
This program normally runs as
/etc/init.d/novell-zmd start
Runs the program in the standard way.
/opt/novell/zenworks/sbin/zmd
Runs the program directly.
command. The file is located in
rug set
/etc/init.d/
/var/opt/novell/log/zenworks/
on SLES 10, SLED 10, and OES 2.
/var/log/
on SLES 9, OES 1, NLD, and RHEL 3/4/5; and in
.
root
or
/usr/sbin/zmd
/etc/opt/novell/zenworks/
on SLES 10, SLED 10, and
/etc/zmd/
on SLES 9, SLES 10, SLED 10, NLD, RHEL,
on SLES 9, OES 1, NLD,
/var/opt/novell/zenworks/
/var/cache/
on SLES 10, SLED
/
/etc/
Command Line Utilities 549