Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 627

Parameter Description
TFTPLogLevel = 2 The value assigned here determines which events are entered in
tftp.log
Valid values are: 0, 1, 2, 3, and 4. The default is 2.
Each message from the TFTP server is assigned a priority level. If
TFTPLogLevel is set to a value equal to or greater than a message's priority
level, that message is entered in
ignored.
Priority meaning:
0: Critical information. Service start, stop, and critical events are logged.
1: Warning information. Only failed client transactions are logged.
2: Transaction information. All completed client transactions are logged.
3: Request information. All client requests and TFTP options are logged.
4: Debugging information. All server events, including each packet received,
are logged.
By default, this parameter is commented out.
TFTPLogFile = /var/opt/ The file where all log file entries are placed.
novell/log/novell-tftp.log
By default, this parameter is commented out.
TFTPLogFileSize = 15 The size of the log file is controlled by the value of TFTPLogFileSize, where 15
is the default (in MB).
When the log file exceeds the TFTPLogFileSize value, it is deleted and
restarted.
By default, this parameter is commented out.
Parameters that are not commented out, but contain no values, are given a default value.
The novell-tftp daemon is compliant with the following RFCs:
RFC 1350 -- THE TFTP PROTOCOL (REVISION2)
RFC 2347 - TFTP Option Extension
RFC 2348 - TFTP Blocksize Option
RFC 2349 - TFTP Timeout Interval and Transfer Size Options
novell-zmgprebootpolicy
The novell-zmgprebootpolicy daemon allows PXE devices to query the ZENworks Linux
Management system for work to do and for Preboot Menu policies.
This daemon is started automatically when installing ZENworks Linux Management, or when
rebooting the server.
"Understanding the novell-zmgprebootpolicy Components" on page 628
"Configuring novell-zmgprebootpolicy" on page 628
. Specifying a high level in an active system can quickly fill the log.
novell-tftp.log
novell-
. All other messages are
Imaging Utilities and Components 627