Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 297

Configuration Element
Password
Proxy
LocalServer
<LocalServer>
<Base></Base>
<Type>zlm</Type>
<User>Administrator</User>
<Password>password</Password>
</LocalServer>
Configuration Element
Base
Description
Password to use when connecting to the remote server. If no password is
specified, zlmmirror reads the password from the following location
depending on Type:
ZLM: /etc/opt/novell/zenworks/zmd/secret
and /etc/zmd/secret
RCE: /etc/ximian/partnernet
YAST: /etc/sysconfig/onlineupdate
When connecting to an RHN server or Dell server, leave this element empty.
NU: /etc/opt/novell/zenworks/zmd/secret
and /etc/zmd/secret
For the Novell Updates (NU) server, the device must be registered with NCC
to use the device secret as Password.
The Proxy configuration element is optional and is used with an Internet
Proxy. You can add the Proxy element anywhere in the RemoteServer
section.
If the Internet proxy requires authentication, the format looks like the
following example:
<Proxy>http://username:password@server:port</Proxy>
If the Internet proxy does not require authentication, the format looks like the
following example:
<Proxy>https://server:port</Proxy>
Description
If the Type element indicates STATIC mirroring, use the Base element to
define the destination path where files will be stored (
filesystem , for example).
If the Type element indicates ZLM mirroring, leave the Base element empty.
for SLES 10 and SLED10
for SLES 9 and OES,
for SLES 10 and SLED10
for SLES 9 and OES,
/path/on/
Mirroring Software 297