Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 317

Configuration Element
<Base></Base>
<Type></Type>
<Platform></Platform>
3 In the section, edit the following configuration element:
<Catalog>
Configuration Element
<Name></Name>
In the section, it is not necessary to provide a value for the
<Catalog>
the bundles of the catalog must be separately mirrored for each target. If you specify a value for
the tag, you can only mirror those architecture packages that match the specified
<Target>
target. You must specify separate URLs for each target in the
file's
<RemoteServer>
4 Rename the mirrored package bundle appropriately after mirroring.
If the catalog that is mirrored for 64-bit target (for example, sles-10-x86_64) also contains the
32-bit architecture packages, you must convert all the 32-bit architecture packages in the
mirrored bundle from 32-bit target to the corresponding 64-bit target by using the zlman bap
command.. You must convert targets of all the 32-bit architecture packages in the mirrored
bundle from 32-bit to the corresponding 64-bit target by using the
To convert all the 32-bit architecture packages from sles-10-i586 to the corresponding sles-10-
x86_64 target, you must run the
Setting
Specify the path to the server you want to mirror, the device model,
and the operating system information.
<Base>http://linux.dell.com/repo/hardware/latest/
device_model/osinfo</Base>
For example:
If the device model is DELL PowerEdge R710 server, and the
operating system is 64-bit SLES 10, the base URL is
<Base>http://linux.dell.com/repo/hardware/latest/
per710/suse10_64/</Base>
Type of server you want to mirror.
<Type>yum</Type>
The platform of the device to which you want to mirror the packages.
<Platform>platform</Platform>
For example, if the target platform is sles-10-x86_64, edit the
Platform tag to be:
<Platform>sles-10</Platform>
The target platform must be defined in ZENworks Linux
Management.
Setting
Specify the name of the catalog you want to mirror from the remote
server in the following format:
<Name>platform-catalog</Name>
For example, if the platform is sles-10, the catalog name must be
<Name>sles-10-catalog</Name>
section.
command as follows:
zlman bap
.
.
.
tag, because
<Target>
tag in the configuration
<Base>
command.
zlman bap
Mirroring Software 317