Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 442

6 Click Next to display the Set AutoInstall Attributes page:
7 Fill in the fields:
Linux kernel file: The path should be relative to the home directory of the novell-tftp daemon.
For example, you might do the following:
a. Copy the kernel file, whose default location is
bootable CD.
b. Place the copy in a location on your imaging server. For example,
linux
c. In this field, enter the path that is relative to the daemon. For example,
Initial RAM drive: The path should be relative to the home directory of the novell-tftp
daemon. For example, you might do the following:
442 Novell ZENworks 7.3 Linux Management Administration Guide
.
on a SLES 9 SP1
/boot/loader/linux
/srv/tftp/autoyast/
autoyast/linux
.