Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 506

Set Cursor Shape Updates to No.
Set the CopyRect option to Yes.
Use 8 bit color mode by setting Restricted Colors to Yes.
On the Managed Device
The speed of the Remote Management session depends upon the processing power of the
managed device. We recommend that you use Pentium* III, 500MHz (or later) with 64 MB
RAM or higher.
Disable the wallpaper.
Configure the following settings at the managed device:
Reduce the screen resolution.
Reduce the depth of color pixels.
More Performance Tuning Tips
For additional information on performance tuning tips, refer to the following Web sites for specific
components:
www.tightvnc.com (http://www.tightvnc.com)
www.realvnc.com (http://www.realvnc.com)
FAQs on x11VNC (http://www.karlrunge.com/x11vnc)
506 Novell ZENworks 7.3 Linux Management Administration Guide