Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 558

User - Name to use when connecting to the remote server. If no user is specified, zlmmirror
reads the identity from the following location depending on Type:
ZLM:
zmd/deviceid
RCE:
YaST:
NU:
zmd/deviceid
YUM: Does not require any authentication.
When connecting to an RHN server or a Dell Server, leave this element empty.
Password - Password to use when connecting to the remote server. If no password is specified,
zlmmirror reads the password from the following location depending on Type:
ZLM:
secret
RCE:
YaST:
NU:
secret
YUM: Does not require any authentication
When connecting to an RHN server or a Dell Server, leave this element empty.
Proxy - The Proxy configuration element is optional and is used with an Internet Proxy. You
can add the Proxy element anywhere in the RemoteServer section. If the Internet proxy requires
authentication, the format looks like the following example:
<Proxy>http://username:password@server:port</Proxy>
If the Internet proxy does not require authentication, the format looks like the following
example:
<Proxy>https://server:port</Proxy>
SystemID - To mirror from the RHN server, you must add the SystemID configuration element
in the zlmmirror configuration file. You can use the
authentication to the RHN server. You need to provide the complete path of the
that is located on the ZENworks Server. The format looks like the following example:
<SystemID> /etc/opt/novell/zenworks/zlmmirror-example-rhn-conf.xml</
SystemID>
Local Server
The local server is specified according to the following:
<LocalServer>
<Base></Base>
<Type>zlm</Type>
<User>Administrator></User>
<Password>letmein</Password>
</LocalServer>
558 Novell ZENworks 7.3 Linux Management Administration Guide
/etc/opt/novell/zenworks/zmd/deviceid
on SLES 10 and SLED 10
/etc/ximian/mcookie
/etc/sysconfig/onlineupdate
/etc/opt/novell/zenworks/zmd/deviceid
on SLES 10 and SLED 10
/etc/opt/novell/zenworks/zmd/secret
on SLES 10 and SLED 10
/etc/ximian/partnernet
/etc/sysconfig/onlineupdate
/etc/opt/novell/zenworks/zmd/secret
on SLES 10 and SLED 10
on SLES 9 and OES, and
on SLES 9 and OES, and
on SLES 9 and OES,
on SLES 9 and OES,
file that has a valid
systemid
/etc/
/etc/
/etc/zmd/
/etc/zmd/
file
systemid