Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 235

11 Click Finish to create the bundle as configured per settings on the Summary page. If you click
Finish, the bundle is created but it does not have devices assigned, a schedule, and so forth. At
some point in the future, you need to configure additional options for the bundle by continuing
with Section 20.4, "Assigning Bundles," on page
or
Click Next to display the Bundle Assignment page to perform the following tasks:
Specify assignments for this bundle
Specify special flags, such as flags to specify to remove conflicting packages or trying a
dry run to test a bundle's deployment
Specify the deployment schedule for this bundle
Specify the installation schedule for this bundle
Specify groups for this bundle
12 Assign the bundle to the devices that you want to distribute the bundle to.
12a Click Add to browse for and select the appropriate Server or Workstation objects.
You can also select Folder or Group objects.
12b Click the down-arrow next to Servers or Workstations to expand the list, then click the
underlined link in the Name column to select the desired objects and display their names
in the Selected list box.
Assigning a bundle to a Folder or Group object is the preferred method of assigning the
bundle. Assigning the bundle to a large number of objects (for example, more than 250)
might cause increased server utilization.
12c Click OK.
13 Click Next to display the Bundle Options page.
238.
Using RPM and File Bundles 235