Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 187

Review the information on the Summary page, making any changes to the policy-group
settings by using the Back button as necessary.
Depending on your needs, you can create the policy group now or you can specify members,
assignments, and schedules for this policy group.
5 Click Finish to create the policy as configured according to the settings on the Summary page.
If you click Finish, the policy group is created but it does not have members, devices assigned,
a schedule, and so forth. At some point in the future, you need to configure additional options
for the policy group by continuing with
or
Click Next to display the Add Group Members page to perform the following tasks:
Specify members for this policy group
Specify assignments for this policy group
Specify the schedule to apply the policy-group assignments
6 Specify the policies to include in this policy group.
6a Click Add to browse for and select the appropriate policy objects.
6b Click the underlined link in the Name column to select the desired policies and display
their names in the Selected list box.
6c Click OK.
7 Click Next to display the Add Assignments page.
8 Assign the policy group to the desired devices.
8a Click Add to browse for and select the appropriate device objects.
Section 17.4, "Assigning Policies," on page 188.
Managing Policies 187