Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 394

2 In this section, click Preboot Services to display the configuration sections.
3 Locate the Server Referral List section:
4 Specify the ZENworks Linux Management servers:
List of server IP addresses and DNS names: Specify the DNS name or IP address of a server
that can host Preboot operations, then click Add to place the server into the referral list.
Move up/Move down: Arranges the order in which the servers are contacted. You can move
only one server at a time.
Remove: To remove a server from the list, select the server, then click Remove.
5 Click either Apply or OK to save the changes.
6 Depending on the ZENworks version of the server, do the following to copy the necessary files
from the ZENworks Linux Management imaging server to your
in your referral list:
ZENworks Version
ZENworks 6.5
394 Novell ZENworks 7.3 Linux Management Administration Guide
Files to Copy
/svr/tftp/z_auto65.cfg
/svr/tftp/pxelinux.0
directory on the servers
\tftp
Action
Copy the files.