Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual page 623

Parameter Description
IPAddress= The IP address to be used by imaging for all communications. If nothing is
entered, novell-pbserv attempts to detect an IP address.
Can be used in a clustering environment to specify the IP address of the virtual
server.
Can also be used in a multiple-NIC environment to bind the imaging server to a
specific IP address.
By default, this is commented out.
LIBRARY_NAME= Full path of the library to be loaded by the ZENWorks Imaging Service. If the
library name is not specified, then by default
from the
By default, this is commented out.
novell-proxydhcp
The novell-proxydhcp daemon provides PXE devices with the information that they require to be
able to connect to the ZENworks Preboot Services system.
This daemon is not started automatically when installing ZENworks Linux Management.
"Understanding the novell-proxydhcp Components" on page 623
"Configuring novell-proxydhcp" on page 623
Understanding the novell-proxydhcp Components
To initiate the novell-proxydhcp daemon, enter the following command listed for Script Location on
the Linux command line in a terminal program:
/etc/init.d/novell-proxydhcp
Table D-7 lists the arguments for this command, the executable it starts, and the configuration file it
uses:
Novell-proxydhcp Command Details
Table D-7
Script Arguments: start, stop, restart, force-reload, status, showpid, install (for descriptions of
these arguments, see
Executable:
/opt/novell/bin/novell-proxydhcpd
Configuration File: /etc/opt/novell/novell-proxydhcp.conf
Configuring novell-proxydhcp
The novell-proxydhcp configuration file (
parameters:
/opt/novell/zenworks/preboot/lib
"Understanding Script Arguments" on page
novell-proxydhcp.conf
is loaded
libzenimgweb.so
directory.
629)
), contains the following
Imaging Utilities and Components 623