Table of Contents
Advertisement
Reviewing the Device Inventory
3 3
®
From the ZENworks
Control Center you can view the complete hardware and software inventory
of servers and workstations. This section discusses the following topics:
Section 33.1, "Accessing the Device Inventory," on page 483
Section 33.2, "Reviewing Device Inventory Summaries," on page 483
Section 33.3, "Reviewing Hardware (General)," on page 484
Section 33.4, "Reviewing Software (General)," on page 484
Section 33.5, "Reviewing Hardware Details," on page 484
Section 33.6, "Refreshing Device Inventory," on page 488
33.1 Accessing the Device Inventory
To view a device's hardware and software inventory:
1 In the ZENworks Control Center, click the Devices tab.
2 Navigate the folder structure to locate the desired device, then click the device to show its
details.
3 Click the Inventory tab.
Refer to the following sections for descriptions of the inventory information:
Section 33.2, "Reviewing Device Inventory Summaries," on page 483
Section 33.3, "Reviewing Hardware (General)," on page 484
Section 33.4, "Reviewing Software (General)," on page 484
Section 33.5, "Reviewing Hardware Details," on page 484
33.2 Reviewing Device Inventory Summaries
The Inventory page provides the following inventory information about each device:
Inventory Information for Devices
Table 33-1
Scan Data Item
Last Scan Date
Alias
Host Name
Mac Address
IP Address
Subnet Mask
Description
The last time the selected managed device was scanned for inventory
information
The alternative name for the managed device
The network name that should resolve to the managed device's IP address
The hardware address of the managed device's network interface card
The unique address of the managed device on the TCP/IP network
The network segment the managed device is on
Reviewing the Device Inventory
33
483
Advertisement
Table of Contents
