Debugging And Logging; Http Server - Novell INTELLISYNC MOBILE SUITE 7.0 - SECURE GATEWAY ADMINISTRATOR GUIDE 04-2006 Administrator's Manual

Debugging and logging

The following properties define and manage debugging and audit logging for
Secure Gateway (default values shown):
Property
LoggingLevel=0
SecureGatewayLogExpirationDays=8

HTTP server

The following properties define and manage HTTP server settings for Secure
Gateway (default values shown):
Property
HttpIPAddress=
HttpPort=80
SecureGatewayPort=80
HttpSSLPort=443
Intellisync Mobile Suite Secure Gateway Administrator's Guide
Configuring the Secure Gateway
Configuring the Secure Gateway properties file
Description
Sets debugging logging for Secure
Gateway. Logging will appear in a file
<secure_gateway_mm_dd_yyyy_n.log>
located in the default installation log
directory. The Secure Gateway server
automatically picks up the change in two
minutes. LoggingLevel property can be set
from 1 (basic information) to 10 (detailed
information).
Specifies the number of days to keep logs
before deletion.
Description
Defines the IP address to listen for HTTP
connections. Defaults to all IP addresses for
server.
Defines the port to listen for HTTP
connections (includes Mobile Gateway
servers and devices). Set to zero (0) to not
listen.
Defines the port to listen for TCP
connections from Mobile Gateway servers.
Defines the port to listen for HTTPS
connections (includes Mobile Gateway
servers and devices). Set to zero (0) to not
listen.
2–4