Table of Contents
Advertisement
13.1 ACL Commands
Use these commands to configure and apply Access Control List (ACL) profiles on the IES.
An ACL (Access Control List) profile allows the system to classify and perform actions on the
incoming traffic. Each ACL profile consists of a rule and an action. ACL profiles let you configure
filters to drop, limit, or modify (QoS fields) specific types of traffic. You can apply the ACL profiles to
individual uplink interfaces, DSL ports, or the whole system.
Applying ACL Profiles
Rules applied to an individual port take priority over rules applied to the whole system. The priority
of the rules for an individual port is not guaranteed, and the priority of the rules for whole system is
not guaranteed.
This table describes the commands.
Table 75 ACL Commands Summary
COMMAND
show interface system acl
interface system
exit
acl <acl-profile>
no acl <acl-profile>
show interface ge-nni <portlist>
acl
interface ge-nni <portlist>
exit
acl <acl-profile>
no acl <acl-profile>
show interface dsl <slot/
portlist> acl
interface dsl <slot/portlist>
exit
IES4005M User's Guide
C
HAPTER
DESCRIPTION
Displays ACL rules applied to the whole system.
Enters the sub-command mode for configuring system-wide
settings.
Leaves the system-wide settings sub-command mode.
Use the specified ACL profile for the system.
Do not use the specified ACL profile for the system.
Displays ACL settings for the specified Gigabit Ethernet uplink
interfaces. You can specify a single port <1>, all ports <*> or a list
of ports <1,2>. You can also include a range of ports <1-2>.
Enters the sub-command mode for configuring the specified Gigabit
Ethernet uplink interfaces. You can specify a single port <1>, all
ports <*> or a list of ports <1,2>. You can also include a range of
ports <1-2>.
Leaves the Gigabit Ethernet uplink port configuration.
Use the specified ACL profile for the ports.
Do not use the specified ACL profile for the ports.
Displays ACL settings for the specified DSL ports.
Enters the sub-command mode for configuring the specified DSL
ports.
Leaves the DSL port configuration.
Switch Features
1 3
M
P
E
13
C
13
C
13
C
13
C
13
E
13
C
13
C
13
C
13
C
13
E
13
C
13
C
13
109
Advertisement
Table of Contents
Troubleshooting
