Table of Contents
Advertisement
7.8 The Channel Status Screen
Use the Channel Status screen to scan wireless LAN channel noises and view the results. Click Network
Setting > Wireless > Channel Status. The screen appears as shown. Click Scan to scan the wireless LAN
channels. You can view the results in the Channel Scan Result section. It'll take about 15 seconds to
finish scanning the wireless LAN channels.
Note: The blue value is the AP count. It's the number of access points (AP) in the wireless LAN
channel.
Note: The AP count may not be a real-time value.
Figure 95 Network Setting > Wireless > Channel Status
7.9 The MESH Screen
Use this screen to enable or disable Zyxel MESH for Multy Pro supported devices. It supports AP steering
and Band steering. AP steering allows wireless clients to roam seamlessly between Multy-Pro-supported
devices in your MESH network by using the same SSID and WiFi password. Also, AP steering helps monitor
wireless clients and drop their connections to optimize the Zyxel Device bandwidth when the clients are
idle or have a low signal. When a wireless client is dropped, it has the opportunity to steer to a Multy-Pro-
supported device with a strong signal. Band steering allows 2.4G/5G dual-band wireless clients to steer
from one band to another.
Chapter 7 Wireless
VMG/XMG Series User's Guide
160
Advertisement
Table of Contents
