Name; Speed-Duplex; Figure 159 Qos Priority Command Example; Figure 160 Name Command Example - ZyXEL Communications ZyXEL Dimension ES-4024 User Manual

ES-4024A User's Guide

Figure 159 qos priority Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# qos priority 4

38.7.12 name

Syntax:
where
<port-name-string>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set a name for the ports.

Figure 160 name Command Example

ras(config)# interface port-channel 1,3-5
ras(config-interface)# name Test

38.7.13 speed-duplex

Syntax:
where
<auto|10-half|10-
full|100-half|100-
full|1000-full>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the speed to 10 Mbps in half duplex mode.
242
name <port-name-string>
Sets a name for your port interface(s).
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
Sets the duplex mode (half or full) and speed (10, 100 or 1000 Mbps)
of the connection on the port. Selecting auto (auto-negotiation)
makes one port able to negotiate with a peer automatically to obtain
the connection speed and duplex mode that both ends support.
Chapter 38 Command Examples