Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Figure 19-6 Menu 11.5 Remote Node Filter (PPPoA or PPPoE Encapsulation)
19.5 Introduction to ATM
ATM (Asynchronous Transfer Mode) is a connection-oriented switching technology that uses
fixed-size cells to transmit data across a dedicated path (permanent virtual circuit (PVC)).
An ATM service contract is an agreement between the carrier and the subscriber to regulate the
average rate and fluctuations of data transmission over an ATM network. This agreement helps
eliminate congestion, which is important for transmission of real time data such as audio and
video connections.
19.6 Editing ATM Layer Options
Follow the steps shown next to edit Menu 11.6 – Remote Node ATM Layer Options.
In menu 11.1, move the cursor to the Edit ATM Options field and then press [SPACE BAR] to
select Yes. Press [ENTER] to display Menu 11.6 – Remote Node ATM Layer Options.
19.6.1 LLC-based Multiplexing or PPP Encapsulation
For LLC-based multiplexing or PPP encapsulation, one VC carries multiple protocols with
protocol identifying information being contained in each packet header.
Remote Node Configuration
Prestige 861H User's Guide
19-7