Message List; System Log Information - Ricoh CL2000 Operating Instructions Manual

Message List

This is a list of messages written in the printer's system log. The system log can be viewed using the
syslog command.

System Log Information

You can use the following methods to view the system log.
• telnet : Use the syslog command. See
Message
Access to NetWare server <file server name> denied. Ei-
ther there is no account for this print server on the Net-
Ware server or the password was incorrect.
add_sess: community<community name> already de-
fined.
add_sess: session<community name>already defined.
add_sess: bad trap addr:<IpAddress>, community:<com-
munity name>
add_sess_ipx: bad trap addr: <IPX address>, communi-
ty:<community name>
add_sess_ipx: community <community name> already
defined.
add_sess_ipx: session_ipx<community name> not de-
fined.
Operating Instructions
p.189 "Commands List"
Description and Solutions
(In print server mode) Cannot log in to the file server.
Make sure that the print server is registered on the file
server. If a password is specified for the print server, de-
lete it.
The same community name already exists. Use another
community name.
A requested community name is not defined.
The IP address (0.0.0.0.) is unavailable when the commu-
nity access type is TRAP. Specify the host IP address for
the TRAP destination.
The IPX address (00:00:00:00:00:00) is unavailable
when the community access type is TRAP. Specify the
host IPX address for the TRAP destination.
The same community name already exists. Use another
community name.
A requested community name is not defined.
Administrator Reference
.
227