Ricoh CL2000 Operating Instructions Manual page 434

Message
WINS name refresh :Server No Response
WINS name registration/refresh error code(errornumber) Set Net BIOS names those do not overlap with each other.
WINS name registration:Server No Response
WINS server address0.0.0.0
WINS Server=<WINS server address> NetBIOS
Name=<NetBIOS name>
WINS wrong scopeID
write error occurred. (diskfull)
write error occurred. (fatal)
Operating Instructions
Description and Solutions
There has been no response to the update request from the
server. Confirm that the WINS server address is correct
and the WINS server is working properly.
Confirm that the WINS server address is correct and the
WINS server is working properly.
There has been no response to the registration request
from the server. Confirm that the WINS server address is
correct and the WINS server is working properly.
The WINS server address has not been specified. Specify
the WINS server address to match the printer name with
WINS.
The printer name has been successfully registered in
<WINS server address>.
The scope ID is wrong.
Specify the correct scope ID.
The hard disk became full while the spool file was being
written.
Wait until enough HDD space becomes available as
printing proceeds.
A fatal error occurred while the spool file was being writ-
ten.
Turn the printer off and then on. If this does not work,
contact your service or sales representative.
Administrator Reference
235