Ricoh CL2000 Operating Instructions Manual page 53

I I I I
Push in the connector.
J J J J
Turn the green part in the direc-
tion of the arrow, and then re-
move the transfer roller.
K K K K
Take out the new transfer roller.
Important
❒ Do not touch the roller part.
L L L L
Hold the green part as shown, and
then insert the transfer roller into
the printer.
ZHBH260E
Important
❒ The end with a longer shaft
must be on the left.
M M M M
Close the front cover slowly.
N N N N
Turn on the power.
O O O O
Make the setting from the control
panel.
When "Replace Fusing Unit"
ZHBH600E
Appears on the Panel Display
A If the following message is on
the control panel, press the { { { { Es-
cape} } } } key for more than five
seconds. The message disap-
pears and a maintenance reset
is performed automatically.
Replace
Fusing Unit
ZHBH610E
Fusing Unit Type 155
ZHBH620E
41
3