Ricoh CL2000 Operating Instructions Manual page 429

Message
Exit pserver
Frametype =<frame type name>
httpd start.
IEEE 802.11b Card Firmware REV.IEEE 802.11b Card
Firmware REV.
IEEE 802.11b current channel <Channel>
IEEE 802.11b MAC Address = <MAC Address>
IEEE 802.11b SSID <ssid> (AP MAC Address < MAC
Address>)
Operating Instructions
Description and Solutions
(In print server mode) Exits the print server because the
necessary print server settings have not been made.
The <frame type name> is configured to be used on Net-
Ware.
An httpd has started.
This is the wireless LAN card's firmware version.
The current channel is displayed.
The value chosen by the user is displayed in ad hoc mode.
The channel used in the access point is displayed in infra-
structure mode.
(Example: Current channel is 11.)
IEEE 802.11b current channel 11
The IEEE 802.11b I/F MAC address is displayed.
(Example: Current MAC address is
00:00:74:XX:XX:XX.)
IEEE 802.11b MAC Address =
00:00:74:XX:XX:XX
The SSID of the access point used in infrastructure mode
and the MAC address of the access point are displayed.
(Example: Current MAC address is xx:xx:xx:xx:xx:xx
and SSID value is "test-ssid".)
IEEE 802.11b SSID test-ssid (AP MAC Address
xx:xx:xx:xx:xx:xx)
Administrator Reference
230