Netware Configuration; Windows 95/98/Me - Ricoh CL2000 Operating Instructions Manual

6. NetWare Configuration

This chapter describes how to set up a client computer when using a NetWare print server.
Note
Use the version of Novell Client provided with your operating system or the latest version.
This section assumes that the client has NetWare client applications installed and is correctly con-
figured to communicate with a NetWare print server. If not, install the necessary applications before
starting the setting up procedure.

Windows 95/98/Me

Follow the procedure to set up a Windows 95/98/Me client.
After installing the printer driver, change the print port to NetWare queue.
Preparation
Log on to the NetWare file server before starting the following procedure.
A A A A
Install the printer driver you want to use as "Local Printer".
Reference
For more information about installing the printer driver, see
Note
Any port can be selected during the installation, however, LPT1 is recommended.
Important
Never have two versions of the same printer driver installed on your system at the same time. When
upgrading to a new version of the printer driver, delete the old version, and then install the new one.
B B B B
Click [Start], point to [Settings], and then click [Printers].
C C C C
In the [Printers] window, click the icon of the printer you want to use.
On the [File] menu, click [Properties].
Operating Instructions
p.44 "Printing via Parallel
Client Reference
Connection".
168