Ricoh CL2000 Operating Instructions Manual page 575

Changing Port Settings
Follow the procedure below to change SmartDeviceMonitor for Client settings, such as proxy server
settings or IPP URL.
A A A A
In the [Printers and Faxes] window, click the icon of the printer you want to use. On the [File]
menu, click [Properties].
B B B B
Click the [Ports] tab, and then click [Configure Port...].
The [Port Configuration:] dialog box appears.
• For TCP/IP, you can configure Timeout Settings.
Note
If you cannot set items on the [Recovery/Parallel Printing] tab, follow the procedure below:
A
Click [Cancel] to close the [Port Configuration:] dialog box.
B
Start SmartDeviceMonitor for Client, and then right-click the SmartDeviceMonitor for Cli-
ent icon on the taskbar.
C
Click [Extended Features Settings], and then select the [Set Recovery/Parallel Printing for each
port] check box.
D
Click [OK] to close the [Extended Features Settings] dialog box.
• For IPP, you can configure User Settings, Proxy Settings and Timeout Settings.
Note
For more information about these settings, see SmartDeviceMonitor for Client Help.
Operating Instructions Client Reference
109