5. Using SmartDeviceMonitor for Admin
Using SmartDeviceMonitor for Admin, you cannot only monitor the status of network printers, but also
change configuration of the network interface board using TCP/IP or IPX/SPX.
SmartDeviceMonitor for Admin is equipped with the following functions;
• Device Information function
• Checks the printer's network settings and device details.
• Checks the number of pages printed for each computer, using the user codes.
• Checks the results of print jobs executed from the computer.
• Enables you to change the printer's network settings.
• Device Settings function
• Limits settings done from the control panel, and disables changes made to certain items.
• Enables the selection of paper type loaded in the printer.
• Energy Saver function
• Switches to, and wakes up from Energy Saver mode.
• System Status function
• Checks information about printing, paper quantity, and such, on the computer.
• Groups function
• Monitors multiple printers at the same time. When there are many printers, you can create groups
and classify the printers to facilitate management.
Operating Instructions
Administrator Reference
96