Ricoh CL2000 Operating Instructions Manual page 283

D In the [Remote Printer No.] box, enter the printer number.
Important
Use the same printer number as that to be created in the printer server.
E Click [OK] to close the property sheet.
F After a confirmation dialog box appears, click [OK].
G G G G
On the [NIB] menu, click [Exit] to exit NIB Setup Tool.
H H H H
Enter "PCONSOLE" after the command prompt.
F:> PCONSOLE
I I I I
Create a print queue as follows:
Note
If you use a currently defined print queue, proceed to step
A On the [Available Options] menu, click [Print Queue Information], and then press { { { { Enter} } } } .
B Press { { { { INSERT} } } } , and then enter a print queue name.
C Press { { { { ESC} } } } to return to the [Available Options] menu.
J J J J
Create a printer as follows:
A On the [Available Options] menu, click [Print Server Information], and then press { { { { Enter} } } } .
B To create a new print server, press { { { { INSERT} } } } , and then enter a print server name.
If you are using a currently defined print server, select one of the print servers shown in the [Print
Server] list.
Important
Use the same name as that specified in NIB Setup Tool. (Step
Operating Instructions Administrator Reference
J
.
F - A).
84