Commands List
This is a list of commands that can be used via remote maintenance.
Note
Type "help" to see a list of commands that can be used.
msh> help
Type "help command_name" to display information about the syntax of that command.
msh> help command_name
TCP/IP address
Use the ifconfig command to configure TCP/IP (IP address, subnet mask, broadcast address, default
gateway address) for the machine.
Reference
msh> ifconfig
Configuration
msh> ifconfig interface_name parameter address
Interface name
ether
naf0
*2
ip1394
*2
fwip0
Operating Instructions
Interface to be configured
*1
Ethernet Interface
IEEE 1394 Interface
Administrator Reference
189