Configuring The Network Interface Board - Ricoh CL2000 Operating Instructions Manual

Configuring the Network Interface Board

The Network Interface Board settings can be displayed by using the commands below.
• telnet : Use the show command. See
mation" .
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
NetBEUI
*1 *4
IP over 1394
*4
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
Location
Contact
Soft switch
Operating Instructions
p.196 "Network Interface Board configuration settings infor-
Meaning
Up means active, Down means inactive.
Internal version number.
Administrator Reference
222