Windows Xp, Windows Server 2003 Print Server Configuration; Configuring The Protocols; Configuring Tcp/Ip And Ipp For Printing - Ricoh CL2000 Operating Instructions Manual

2. Windows XP, Windows Server 2003 Print Server Configuration

To use a printer connected to the Ethernet interface, click [SmartDeviceMonitor], [Standard TCP/IP Port],
or [LPR Port] when installing the printer driver.
• SmartDeviceMonitor
See p.35 "Configuring the
RPCS Printer Driver", and
• Standard TCP/IP Port, LPR Port
See p.35 "Configuring the
p.44 "Installing the PostScript Printer
Note
If you want to use "LPR Port", "Print Services for UNIX" must be installed. For details, see Win-
dows XP or Windows Server 2003 Help.

Configuring the Protocols

Configuring TCP/IP and IPP for Printing

This describes how to configure the network interface board and Windows XP or Windows Server 2003
to use TCP/IP and IPP.
Configuring the printer
Configure the printer to use TCP/IP.
• Check TCP/IP is set to active. (The factory default is active.)
• Assign an IP address and make other settings required for TCP/IP.
Operating Instructions
Protocols", p.38 "Installing
p.44 "Installing the PostScript Printer
Protocols", p.39 "Installing the PCL 5c or RPCS Printer
Driver".
Administrator Reference
Software", p.39 "Installing the PCL 5c or
Driver".
35
Driver", and