Ricoh CL2000 Operating Instructions Manual page 563

Reference
For more information about how to make the above settings, see "Configuring the printer for the
Network", Quick Installation Guide.
If DHCP is used to assign IP addresses, see Appendix, "When Using DHCP", Administrator Ref-
erence.
To use IP over 1394, see Option Setup Guide.
Note
After setting the IP address, use the ping command to check it is set correctly.
A
Click [Start], point to [All Programs], point to [Accessories], and then click [Command Prompt].
B
Enter the following: (Example: IP address is 192.168.15.16)
C:> ping 192.168.15.16
If the address is configured correctly, the following message appears:
Reply from 192.168.15.16 : bytes=32 time<10ms TTL=32
If the address is configured incorrectly, the following message appears:
Request timed out.
Configuring a Windows XP and Windows Server 2003 computer
Follow the procedure below to configure a Windows XP and Windows Server 2003 computer to use
TCP/IP:
A
On the [Start] menu, point to [Control Panel], and then click [Network Connections].
B
Click [Local Area Connection].
C
On the [File] menu, click [Properties].
Note
When using IP over 1394, click [1394 Connection].
Operating Instructions Client Reference
97